Automatic Penetration Tester for Filter Materials and Respirators

Automated Penetration Tester for Filter Material and Respirator SC-FT-1406DApplicationSC-FT-1406 Automatic Filter Tester is designed to test the filter efficiency and resistance of the filter material and masks.The following products can be tested:1.Material, including melt-blown, electrostatic cotton, PTFE, glass fiber and othe

Featured Products

Automated Penetration Tester for Filter Material and Respirator SC-FT-1406D

Application

SC-FT-1406 Automatic Filter Tester is designed to test the filter efficiency and resistance of the filter material and masks.
The following products can be tested:
1.Material, including melt-blown, electrostatic cotton, PTFE, glass fiber and other filter materials.
2.Masks, including medical face mask, N series mask, FFP series mask,etc.
3.Small filter element and other industries. For example, small filter for anesthesia machine.


Technical Parameters
 
Technical  Data  Sheet
ItemParameter
AerosolNaCl, Paraffin oil
Air flow32~95L/min
Test area100cm2
Efficiency range20%~99.97%
Resistance range0~125Pa and 0~500Pa are optional
Flow rate accuracy±3%
Resistance accuracy1Pa
Power supplyAC220V, 50 or 60 Hz
Dimension730mm*730mm*1480mm

Product Pictures

Automated Penetration Tester for Filter Material and Respirator
Automated Penetration Tester for Filter Material and Respirator
Automated Penetration Tester for Filter Material and Respirator

Features

1.Three modes can be used to test filter efficiency.
Mode 1: 0.3μm filter efficiency.
Mode 2: It can provide the filter efficiency of different particle size 0.3, 0.5, 1, 3μm at the same time.
Mode 3: It can provide the filter efficiency of PM1.0 and PM2.5 at the same time.
2.Adjustment of different test flow can be easily achieved through flow control valve. Common flow rates are 32L/min, 55L/min, 60L/min, 85L/min, 95L/min and so on.

3.The resistance test is completed and displayed at the same time as the filter efficiency test.
4.A test calibration method (multiple point-to-point calibrations) is provided, with a calibration filter attached to the instrument for regular calibration of the 0.3μm filter efficiency test result. 
5.Comprehensive test data information. In order to facilitate user's analysis of the test situation, the instrument's test results contain test data and test conditions. Test results can be printed and saved directly.

6.Optional data acquisition software, connected to the computer to achieve A4 report printing or product data label printing. It is also convenient for remote calibration.


Automated Penetration Tester for Filter Material and Respirator
Automated Penetration Tester for Filter Material and Respirator
Automated Penetration Tester for Filter Material and Respirator
Automated Penetration Tester for Filter Material and Respirator
Automated Penetration Tester for Filter Material and Respirator
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours